How to make pendrive bootable without any software

How to create a bootable Pendrive in windows10

Step 1: connect the pendrive to the computer

           which you want to make bootable

*make sure the pendrive is connected

Step 2: type in search bar 'cmd' this will show like below

Step 3: open the command prompt and type the command 

          ‘diskpart’

    this will show you in command prompt like

Then press enter and you will see a message then click on ok 

            this will open a new command prompt

Now we type all commands in newly open command prompt

Step 4: type the command 'list disk' and press enter this will

            seem like image below

Step 5: type the command ‘select disk @’

 where '@' is the no. of your disk shown in command  prompt

Step 6: type the command ‘clean’ and press enter 

Step 7: type the command ‘creat partition primary’ and

              press enter

Step 8: type the command ‘select partition 1’ and press enter

Step 9: type the command ‘active’ and press enter

Step 10: type the command ‘format fs=fat32 quick’ and 

                press enter

Step 11: type the command ‘assign’ and press enter

  Step 12: copy all the content of windows 10 extracted files

              from windows10 ISO into the Pendrive

    and exit the command prompt

You can also copy content of windows 10 from CD drive into

 the Pendrive

Now you can remove your pendrive

enjoy your bootable pendrive that you have made

      #THANKS FOR VISITING OUR BLOG#